Made from quality 5mm 3K twill isotropic carbon fibre, and weighing 56g, this is our ultimate 5″ / 195mm unibody race X-frame. When coupled with an Evo pod the all up weight of pod + frame is only 78g, about 88g with camera and VTx.
Hollowed out extensions at the ends of the arms provide motor protection (they are intended to compress / break rather than losing an arm) and allow a clean airflow path for cooling.
Motor holes are 16×16 with one pair elongated to 16×19.
This frame is intended to be used with an EVO pod, a 4in1 ESC, and a micro camera/vtx combination for a very lightweight, strong, racing machine.
Standard 30.5×30.5 FC/4in1 mount holes are centred in the frame, and the EVO pod attaches by 3mm screws on 44x32mm centres.
Carbon is stiff, strong, and light, allowing high filter settings in a lightweight build. Its stiffness will eventually cause delamination and failure after repeated hard impacts. Polycarbonate is is more durable, and recommended for ‘practice’ or everyday quads. This is intended for the ultimate light weight race quad with durability as a secondary consideration. Even so, minimum arm dimensions of 12x5mm and carefully designed curvature has resulted in a very, very tough frame.
This quad flies best with the default low pass filters (100Hz PT1 on gyro, and 100Hz biquad on Dterm). Only the the dynamic notch filter needs to be enabled (disable the other notch filters).
Motor bolts are M3x8mm. Take care that your motors have 3mm for the bolt to go in. If not, get a dremel or file and grind them down to 7mm. Loctite can be used on carbon.
We also provide a more durable 8mm polycarbonate version of this frame.